An integrated technology for quantitative wide mutational scanning of human antibody Fab libraries.

Antibodies are engineerable quantities in medicine. Learning antibody molecular recognition would enable the in silico design of high affinity binders against nearly any proteinaceous surface. Yet, publicly available experiment antibody sequence-binding datasets may not contain the mutagenic, antigenic, or antibody sequence diversity necessary for deep learning approaches to capture molecular recognition. In part, this is because limited experimental platforms exist for assessing quantitative and simultaneous sequence-function relationships for multiple antibodies. Here we present MAGMA-seq, an integrated technology that combines multiple antigens and multiple antibodies and determines quantitative biophysical parameters using deep sequencing. We demonstrate MAGMA-seq on two pooled libraries comprising mutants of nine different human antibodies spanning light chain gene usage, CDR H3 length, and antigenic targets. We demonstrate the comprehensive mapping of potential antibody development pathways, sequence-binding relationships for multiple antibodies simultaneously, and identification of paratope sequence determinants for binding recognition for broadly neutralizing antibodies (bnAbs). MAGMA-seq enables rapid and scalable antibody engineering of multiple lead candidates because it can measure binding for mutants of many given parental antibodies in a single experiment.

Development of a platform method for rapid detection and characterization of domain-specific post-translational modifications in bispecific antibodies.

Charge heterogeneity is inherent to all therapeutic antibodies and arises from post-translational modifications (PTMs) and/or protein degradation events that may occur during manufacturing. Among therapeutic antibodies, the bispecific antibody (bsAb) containing two unique Fab arms directed against two different targets presents an additional layer of complexity to the charge profile. In the context of a bsAb, a single domain-specific PTM within one of the Fab domains may be sufficient to compromise target binding and could potentially impact the stability, safety, potency, and efficacy of the drug product. Therefore, characterization and routine monitoring of domain-specific modifications is critical to ensure the quality of therapeutic bispecific antibody products. We developed a Digestion-assisted imaged Capillary isoElectric focusing (DiCE) method to detect and quantitate domain-specific charge variants of therapeutic bispecific antibodies (bsAbs). The method involves enzymatic digestion using immunoglobulin G (IgG)-degrading enzyme of S. pyogenes (IdeS) to generate F(ab)2 and Fc fragments, followed by imaged capillary isoelectric focusing (icIEF) under reduced, denaturing conditions to separate the light chains (LCs) from the Fd domains. Our results suggest that DiCE is a highly sensitive method that is capable of quantitating domain-specific PTMs of a bsAb. In one case study, DiCE was used to quantitate unprocessed C-terminal lysine and site-specific glycation of Lys98 in the complementarity-determining region (CDR) of a bsAb that could not be accurately quantitated using conventional, platform-based charge variant analysis, such as intact icIEF. Quantitation of these PTMs by DiCE was comparable to results from peptide mapping, demonstrating that DiCE is a valuable orthogonal method for ensuring product quality. This method may also have potential applications for characterizing fusion proteins, antibody-drug conjugates, and co-formulated antibody cocktails.

Utilizing fab fragment-conjugated surface plasmon resonance-based biosensor for detection of Salmonella Enteritidis.

Although antibodies, a key element of biorecognition, are frequently used as biosensor probes, the use of these large molecules can lead to adverse effects. Fab fragments can be reduced to allow proper antigen-binding orientation via thiol groups containing Fab sites that can directly penetrate Au sites chemically. In this study, the ability of the surface plasmon resonance (SPR) sensor to detect Salmonella was studied. Tris(2-carboxyethyl)phosphine was used as a reducing agent to obtain half antibody fragments. Sensor surface was immobilized with antibody, and bacteria suspensions were injected from low to high concentrations. Response units were changed by binding first reduced antibody fragments, then bacteria. The biosensor was able to determine the bacterial concentrations between 103 and 108 CFU/mL. Based on these results, the half antibody fragmentation method can be generalized for faster, label-free, sensitive, and selective detection of other bacteria species.

Stabilization of adalimumab Fab through the introduction of disulfide bonds between the variable and constant domains.

Fab is a promising format for antibody drug. Therefore, efforts have been made to improve its thermal stability for therapeutic and commercial use. So far, we have attempted to introduce a disulfide bond into the Fab fragment to improve its thermal stability and demonstrated that it is possible to do this without sacrificing its biochemical function. In this study, to develop a novel stabilization strategy for Fab, we attempted to introduce a disulfide bond between the variable and constant domains and prepared three variants of Fab; H:G10C + H:P210C, L:P40C + L:E165C, and H:G10C + H:P210C + L:P40C + L:E165C. Differential scanning calorimetry measurements showed that each of these variants had improved thermal stability. In addition, the variants with two disulfide bonds demonstrated a 6.5 °C increase in their denaturation temperatures compared to wild-type Fab. The introduction of disulfide bonds was confirmed by X-ray crystallography, and the variants retained their antigen-binding activity. The variants were also found to be less aggregative than the wild type. Our results demonstrate that the introduction of a disulfide bond between the variable and constant domains significantly improves the thermal stability of Fab.

Engineered antigen-binding fragments for enhanced crystallization of antibody:antigen complexes.

The atomic-resolution structural information that X-ray crystallography can provide on the binding interface between a Fab and its cognate antigen is highly valuable for understanding the mechanism of interaction. However, many Fab:antigen complexes are recalcitrant to crystallization, making the endeavor a considerable effort with no guarantee of success. Consequently, there have been significant steps taken to increase the likelihood of Fab:antigen complex crystallization by altering the Fab framework. In this investigation, we applied the surface entropy reduction strategy coupled with phage-display technology to identify a set of surface substitutions that improve the propensity of a human Fab framework to crystallize. In addition, we showed that combining these surface substitutions with previously reported Crystal Kappa and elbow substitutions results in an extraordinary improvement in Fab and Fab:antigen complex crystallizability, revealing a strong synergistic relationship between these sets of substitutions. Through comprehensive Fab and Fab:antigen complex crystallization screenings followed by structure determination and analysis, we defined the roles that each of these substitutions play in facilitating crystallization and how they complement each other in the process.

Preclinical Evaluation of 99mTc-MAG3-5-Fab Targeting TREM2 in Lung Cancer Mouse Models: A Comparison with 99mTc-MAG3-5-F(ab')2.

Triggering receptor expressed on myeloid cells-2 (TREM2), which is expressed on the surface of tumor-associated macrophages (TAMs), has been found to play a major role in the diagnosis and treatment of tumors. TREM2 expression is significantly upregulated in tumor tissues, and therefore, targeting TREM2 for tumor imaging may be of value. Previously, we performed TREM2 targeting imaging by using 68Ga-NOTA-COG1410 or a 124I-labeled monoclonal antibody (mAb) and F(ab')2 in mouse models of colon and gastric tumors. However, some of the shortcomings of these probes (i.e., the high uptake of 68Ga-NOTA-COG1410 in the liver, the difficulty of obtaining iodine-124, and the long half-life of iodine-124) have hindered their clinical use. Herein, we sought to synthesize novel molecular probes targeting TREM2 that are more conducive to clinical translation, eliminating the interference of isotope availability and in vivo probe biodistribution issues. Therefore, we established A549 cell lines with negative human TREM2 (hTREM2) expression (GFP tag; hTREM2- A549) or upregulated hTREM2 expression (GFP tag; hTREM2+ A549) using lentiviral transfection and confirmed these with Western blotting and immunocytochemistry. We then prepared a mouse anti-human TREM2 (5-mAb) by immunizing with the hTREM2 antigen. The antibody fragments 5-F(ab')2 and 5-Fab were prepared from 5-mAb, and 99mTc-MAG3-5-F(ab')2 and 99mTc-MAG3-5-Fab were then synthesized with excellent stability and specificity. 99mTc-MAG3-5-F(ab')2 had a slightly higher in vitro affinity than 99mTc-MAG3-5-Fab (Kd = 3.32 ± 0.05 nmol versus 4.62 ± 0.85 nmol). 99mTc-MAG3-5-F(ab')2 and 99mTc-MAG3-5-Fab both showed excellent specificity: after adding a 100-fold precursor, the two probes binding to the cells were almost blocked. In vivo pharmacokinetics showed that the distribution and elimination half-lives of 99mTc-MAG3-5-Fab (T1/2α = 1.25 ± 0.30 min and T1/2ß = 21.98 ± 2.80 min, respectively) were significantly reduced compared to those of 99mTc-MAG3-5-F(ab')2 (T1/2α = 2.64 ± 0.37 min and T1/2ß = 86.55 ± 26.86 min, respectively). In micro single-photon emission computed tomography/computed tomography (micro-SPECT/CT) imaging, the tumor was clearly displayed at 1 h after 99mTc-MAG3-5-Fab injection, while the blood background was extremely low at 3 h, and the probe was mainly excreted through the kidneys and biliary tract. 99mTc-MAG3-5-F(ab')2 uptake was also detected at the tumor site, although the blood background was consistently high. The biodistribution results were consistent with the micro-SPECT/CT imaging results. 99mTc-MAG3-5-Fab could clearly display hTREM2+ A549 tumors in a short time (1 h) with low uptake in nontumor organs and tissues and thus has clinical application prospects.

Recombinant humanized Fab fragments targeting the CFC domain of human Cripto-1.

In the era of immunotherapy, the targeting of disease-specific biomarkers goes hand in hand with the development of highly selective antibody-based reagents having optimal pharmacological/toxicological profiles. One interesting and debated biomaker for several types of cancers is the onco-fetal protein Cripto-1 that is selectively expressed in many solid tumours and has been actively investigated as potential theranostic target. Starting from previously described anti-CFC/Cripto-1 murine monoclonal antibodies, we have moved forward to prepare the humanized recombinant Fabs which have been engineered so as to bear an MTGase site useful for a one-step site-specific labelling. The purified and bioconjugated molecules have been extensively characterized and tested on Cripto-1-positive cancer cells through in vitro binding assays. These recombinant Fab fragments recognize the target antigen in its native form on intact cells suggesting that they can be further developed as reagents for detecting Cripto-1 in theranostic settings.

Strategies for the production of isotopically labelled Fab fragments of therapeutic antibodies in Komagataella phaffii (Pichia pastoris) and Escherichia coli for NMR studies.

The importance and fast growth of therapeutic monoclonal antibodies, both innovator and biosimilar products, have triggered the need for the development of characterization methods at high resolution such as nuclear magnetic resonance (NMR) spectroscopy. However, the full power of NMR spectroscopy cannot be unleashed without labelling the mAb of interest with NMR-active isotopes. Here, we present strategies using either Komagataella phaffii (Pichia pastoris) or Escherichia coli that can be widely applied for the production of the antigen-binding fragment (Fab) of therapeutic antibodies of immunoglobulin G1 kappa isotype. The E. coli approach consists of expressing Fab fragments as a single polypeptide chain with a cleavable linker between the heavy and light chain in inclusion bodies, while K. phaffii secretes a properly folded fragment in the culture media. After optimization, the protocol yielded 10-45 mg of single chain adalimumab-Fab, trastuzumab-Fab, rituximab-Fab, and NISTmAb-Fab per liter of culture. Comparison of the 2D-1H-15N-HSQC spectra of each Fab fragment, without their polyhistidine tag and linker, with the corresponding Fab from the innovator product showed that all four fragments have folded into the correct conformation. Production of 2H-13C-15N-adalimumab-scFab and 2H-13C-15N-trastuzumab-scFab (>98% enrichment for all three isotopes) yielded NMR samples where all amide deuterons have completely exchanged back to proton during the refolding procedure.

Crystal structures and molecular dynamics simulations of a humanised antibody fragment at acidic to basic pH.

Antibody-fragment (Fab) therapy development has the potential to be accelerated by computational modelling and simulations that predict their target binding, stability, formulation, manufacturability, and the impact of further protein engineering. Such approaches are currently predicated on starting with good crystal structures that closely represent those found under the solution conditions to be simulated. A33 Fab, is an undeveloped immunotherapeutic antibody candidate that was targeted to the human A33 antigen homogeneously expressed in 95% cases of primary and metastatic colorectal cancers. It is now used as a very well characterised testing ground for developing analytics, formulation and protein engineering strategies, and to gain a deeper understanding of mechanisms of destabilisation, representative of the wider therapeutic Fab platform. In this article, we report the structure of A33 Fab in two different crystal forms obtained at acidic and basic pH. The structures overlapped with RMSD of 1.33 Å overall, yet only 0.5 Å and 0.76 Å for the variable- and constant regions alone. While most of the differences were within experimental error, the switch linker between the variable and the constant regions showed some small differences between the two pHs. The two structures then enabled a direct evaluation of the impact of initial crystal structure selection on the outcomes of molecular dynamics simulations under different conditions, and their subsequent use for determining best fit solution structures using previously obtained small-angle x-ray scattering (SAXS) data. The differences in the two structures did not have a major impact on MD simulations regardless of the pH, other than a slight persistence of structure affecting the solvent accessibility of one of the predicted APR regions of A33 Fab. Interestingly, despite being obtained at pH 4 and pH 9, the two crystal structures were more similar to the SAXS solution structures obtained at pH 7, than to those at pH 4 or pH 9. Furthermore, the P65 crystal structure from pH 4 was also a better representation of the solution structures at any other pH, than was the P1 structure obtained at pH 9. Thus, while obtained at different pH, the two crystal structures may represent highly (P65) and lesser (P1) populated species that both exist at pH 7 in solution. These results now lay the foundation for confident MD simulations of A33 Fab that rationalise or predict behaviours in a range of conditions.

Genotyped functional screening of soluble Fab clones enables in-depth analysis of mutation effects.

Monoclonal antibodies (mAbs) and their fragments are widely used in therapeutics, diagnostics and basic research. Although display methods such as phage display offer high-throughput, affinities of individual antibodies need to be accurately measured in soluble format. We have developed a screening platform capable of providing genotyped functional data from a total of 9216 soluble, individual antigen binding fragment (Fab) clones by employing next-generation sequencing (NGS) with hierarchical indexing. Full-length, paired variable domain sequences (VL-VH) are linked to functional screening data, enabling in-depth analysis of mutation effects. The platform was applied to four phage display-selected scFv/Fab screening projects and one site-saturation VH affinity maturation project. Genotyped functional screening simultaneously enabled the identification of affinity improving mutations in the VH domain of Fab 49A3 recognizing Dengue virus non-structural protein 1 (NS1) serotype 2 and informed on VH residue positions which cannot be changed from wild-type without decreasing the affinity. Genotype-based identification revealed to us the extent of intraclonal signal variance inherent to single point screening data, a phenomenon often overlooked in the field. Moreover, genotyped screening eliminated the redundant selection of identical genotypes for further study and provided a new analysis tool to evaluate the success of phage display selections and remaining clonal diversity in the screened repertoires.

Arginine cluster introduction on framework region in anti-lysozyme antibody improved association rate constant by changing conformational diversity of CDR loops.

Antibodies are used for many therapeutic and biotechnological purposes. Because the affinity of an antibody to the antigen is critical for clinical efficacy of pharmaceuticals, many affinity maturation strategies have been developed. Although we previously reported an affinity maturation strategy in which the association rate of the antibody toward its antigen is improved by introducing a cluster of arginine residues into the framework region of the antibody, the detailed molecular mechanism responsible for this improvement has been unknown. In this study, we introduced five arginine residues into an anti-hen egg white lysozyme antibody (HyHEL10) Fab fragment to create the R5-mutant and comprehensively characterized the interaction between antibody and antigen using thermodynamic analysis, X-ray crystallography, and molecular dynamics (MD) simulations. Our results indicate that introduction of charged residues strongly enhanced the association rate, as previously reported, and the antibody-antigen complex structure was almost the same for the R5-mutant and wild-type Fabs. The MD simulations indicate that the mutation increased conformational diversity in complementarity-determining region loops and thereby enhanced the association rate. These observations provide the molecular basis of affinity maturation by R5 mutation.

Human anti-N1 monoclonal antibodies elicited by pandemic H1N1 virus infection broadly inhibit HxN1 viruses in vitro and in vivo.

Neuraminidase (NA) is one of the two influenza virus surface glycoproteins, and antibodies that target it are an independent correlate of protection. However, our current understanding of NA antigenicity is incomplete. Here, we describe human monoclonal antibodies (mAbs) from a patient with a pandemic H1N1 virus infection in 2009. Two mAbs exhibited broad reactivity and inhibited NA enzyme activity of seasonal H1N1 viruses circulating before and after 2009, as well as viruses with avian or swine N1s. The mAbs provided robust protection from lethal challenge with human H1N1 and avian H5N1 viruses in mice, and both target an epitope on the lateral face of NA. In summary, we identified two broadly protective NA antibodies that share a novel epitope, inhibited NA activity, and provide protection against virus challenge in mice. Our work reaffirms that NA should be included as a target in future broadly protective or universal influenza virus vaccines.

Cross-linking disulfide bonds govern solution structures of diabodies.

In the last years, antibodies have emerged as a promising new class of therapeutics, due to their combination of high specificity with long serum half-life and low risk of side-effects. Diabodies are a popular novel antibody format, consisting of two Fv domains connected with short linkers. Like IgG antibodies, they simultaneously bind two target proteins. However, they offer altered properties, given their smaller size and higher rigidity. In this study, we conducted the-to our knowledge-first molecular dynamics (MD) simulations of diabodies and find a surprisingly high conformational flexibility in the relative orientation of the two Fv domains. We observe rigidifying effects through the introduction of disulfide bonds in the Fv -Fv interface and characterize the effect of different disulfide bond locations on the conformation. Additionally, we compare VH -VL orientations and paratope dynamics between diabodies and an antigen binding fragment (Fab) of the same sequence. We find mostly consistent structures and dynamics, indicating similar antigen binding properties. The most significant differences can be found within the CDR-H2 loop dynamics. Of all CDR loops, the CDR-H2 is located closest to the artificial Fv -Fv interface. All examined diabodies show similar VH -VL orientations, Fv -Fv packing and CDR loop conformations. However, the variant with a P14C-K64C disulfide bond differs most from the Fab in our measures, including the CDR-H3 loop conformational ensemble. This suggests altered antigen binding properties and underlines the need for careful validation of the disulfide bond locations in diabodies.

Recombinant production of antibody antigen-binding fragments with an N-terminal human growth hormone tag in mammalian cells.

Antigen-binding fragments (Fabs) of antibodies are both key biopharmaceuticals and valuable tools for basic life science. To streamline the production of diverse Fabs by capitalizing on standard and highly optimized protein production protocols, we here explore a method to prepare recombinant Fabs as secreted fusion proteins with an N-terminal human growth hormone domain and an octa-histidine tag. These tagged Fabs can be purified with standard immobilized metal chelate affinity chromatography. We first demonstrated Fab overproduction using the rat monoclonal antibody NZ-1. Optimization of linker residues enabled the complete removal of the tags by TEV protease, leaving only two additional residues at the N-terminus of the heavy chain. We purified NZ-1 Fab at ∼4 µg/mL of culture supernatant and further confirmed that the NZ-1 Fab from the fusion protein maintained its native fold and binding affinity for target cell-surface antigens. We also showed that several other Fabs of mouse IgG1s, the major subclass in mice, could be produced with the same procedure. Our preparation method can provide greater flexibility in functional and structural modifications of target Fabs because specialized purification techniques are not necessary.

Structural insight to elucidate the binding specificity of the anti-cortisol Fab fragment with glucocorticoids.

Cortisol is a steroid hormone that is produced by the adrenal gland. It is a primary stress hormone that increases glucose levels in the blood stream. High concentrations of cortisol in the body can be used as a biomarker for acute and chronic stress and related mental and physiological disorders. Therefore, the accurate quantification of cortisol levels in body fluids is essential for clinical diagnosis. In this article, we describe the isolation of recombinant anti-cortisol antibodies with high affinity for cortisol and discover their cross-reactivity with other glucocorticoids. To describe the cortisol binding site and elucidate the structural basis for the binding specificity, the high-resolution crystal structures of the anti-cortisol (17) Fab fragment in the absence of glucocorticoid (2.00 Å) and the presence of cortisol (2.26 Å), corticosterone (1.86 Å), cortisone (1.85 Å) and prednisolone (2.00 Å) were determined. To our knowledge, this is the first determined crystal structure of a cortisol-specific antibody. The recognition of cortisol is driven by hydrophobic interactions and hydrogen bonding at the protein-ligand interface coupled with a conformational transition. Comparison of ligand-free and ligand-bound structures showed that the side chains of residues Tyr58-H and Arg56-H can undergo local conformational changes at the binding site, most likely prior to the binding event via a conformational selection mechanism. Compared to other anti-steroid antibody-antigen complexes, (17) Fab possesses a structurally unique steroid binding site, as the H3 loop from the CDR area has only a minor contribution, but framework residues have a prominent contribution to hapten binding.

Structural insight into an anti-BRIL Fab as a G-protein-coupled receptor crystallization chaperone.

Structure determination of G-protein-coupled receptors (GPCRs) is key for the successful development of efficient drugs targeting GPCRs. BRIL is a thermostabilized apocytochrome b562 (with M7W/H102I/R106L mutations) from Escherichia coli and is often used as a GPCR fusion protein for expression and crystallization. SRP2070Fab, an anti-BRIL antibody Fab fragment, has been reported to facilitate and enhance the crystallization of BRIL-fused GPCRs as a crystallization chaperone. This study was conducted to characterize the high-resolution crystal structure of the BRIL-SRP2070Fab complex. The structure of the BRIL-SRP2070Fab complex was determined at 2.1 Šresolution. This high-resolution structure elucidates the binding interaction between BRIL and SRP2070Fab. When binding to BRIL, SRP2070Fab recognizes conformational epitopes, not linear epitopes, on the surface of BRIL helices III and IV, thereby binding perpendicularly to the helices, which indicates stable binding. Additionally, the packing contacts of the BRIL-SRP2070Fab co-crystal are largely due to SRP2070Fab rather than BRIL. The accumulation of SRP2070Fab molecules by stacking is remarkable and is consistent with the finding that stacking of SRP2070Fab is predominant in known crystal structures of BRIL-fused GPCRs complexed with SRP2070Fab. These findings clarified the mechanism of SRP2070Fab as a crystallization chaperone. Moreover, these data will be useful in the structure-based drug design of membrane-protein drug targets.

Biochemical separation of Cetuximab-Fab from papain-digested antibody fragments and radiolabeling with 64Cu for potential use in radioimmunotheranostics.

Engineered Fab fragments of monoclonal antibodies (mAbs) after radiolabeling with suitable radiometals have the potential to play a key role in personalized radioimmunotheranostics of cancer patients. In this study, we have generated Fab fragment of Cetuximab, a mAb targeting epidermal growth factor receptor (EGFR) expression and purified from the Fc and other fragments by ultrafiltration and affinity chromatography. The Cetuximab-Fab was conjugated with a suitable bifunctional chelator and radiolabeled with no-carrier-added (NCA) 64Cu produced via 64Zn (n, p) 64Cu reaction in a nuclear reactor. The radioimmunoconjugate obtained after size exclusion chromatographic separation possessed >95% radiochemical purity and it retained its integrity over at least three half-lives of the radiometal. Biodistribution studies was performed in fibrosarcoma tumor bearing Swiss mice, which demonstrated the explicit need for purification of the Cetuximab-Fab from Fc fragments. Enhanced and rapid tumor uptake with decent tumor-to-background ratio with prolonged retention was observed when radiolabeled purified Cetuximab-Fab was intravenously administered in animal models. Overall, this preclinical study established the pivotal role of separation science and technology to obtain the radioimmunoconjugate with requisite purity in order to demonstrate optimal pharmacokinetics and maximized treatment efficacy.

Real-time monitoring of papain digestion of antibodies immobilized with various strategies by optical interferometry.

Antigen binding fragments (Fabs) employed in research are typically generated by the papain digestion of monoclonal antibodies. However, the interaction between papain and antibodies at the interface remains unclear. Herein, we developed ordered porous layer interferometry for the label-free monitoring of the interaction between the antibody and papain at liquid-solid interfaces. Human immunoglobulin G (hIgG) was used as the model antibody, and different strategies were employed to immobilize it on the surface of silica colloidal crystal (SCC) films which are optical interferometric substrates. It was observed that different immobilization strategies induced different changes in the optical thickness (OT) of SCCs. The order of rate of the changes of OT from largest to smallest was IgG immobilized by protein A orientation, glutaraldehyde coupling, and physical adsorption. This phenomenon can be explained by the varied orientations of the antibodies created at the interface by the different modification procedures. The Fab-up orientation maximized the exposure of the hinge region sulfhydryl group and easily underwent conformational transitions because hIgG was immobilized by protein A. This process stimulates papain to produce the highest degree of activity, resulting in the greatest decrease in OT. This study provides insights into the catalysis of papain on antibodies.

Backbone NMR assignment of the yeast expressed Fab fragment of the NISTmAb reference antibody.

The monoclonal antibody (mAb) protein class has become a primary therapeutic platform for the production of new life saving drug products. MAbs are comprised of two domains: the antigen-binding fragment (Fab) and crystallizable fragment (Fc). Despite the success in the clinic, NMR assignments of the complete Fab domain have been elusive, in part due to problems in production of properly folded, triply-labeled 2H,13C,15N Fab domain. Here, we report the successful recombinant expression of a triply-labeled Fab domain, derived from the standard IgG1κ known as NISTmAb, in yeast. Using the 2H,13C,15N Fab domain, we assigned 94% of the 1H, 13C, and 15N backbone atoms.

Structural mechanism of Fab domain dissociation as a measure of interface stability.

Therapeutic antibodies should not only recognize antigens specifically, but also need to be free from developability issues, such as poor stability. Thus, the mechanistic understanding and characterization of stability are critical determinants for rational antibody design. In this study, we use molecular dynamics simulations to investigate the melting process of 16 antigen binding fragments (Fabs). We describe the Fab dissociation mechanisms, showing a separation in the VH-VL and in the CH1-CL domains. We found that the depths of the minima in the free energy curve, corresponding to the bound states, correlate with the experimentally determined melting temperatures. Additionally, we provide a detailed structural description of the dissociation mechanism and identify key interactions in the CDR loops and in the CH1-CL interface that contribute to stabilization. The dissociation of the VH-VL or CH1-CL domains can be represented by conformational changes in the bend angles between the domains. Our findings elucidate the melting process of antigen binding fragments and highlight critical residues in both the variable and constant domains, which are also strongly germline dependent. Thus, our proposed mechanisms have broad implications in the development and design of new and more stable antigen binding fragments.